KANTO - YU3 POWERED BOOKSHELF SPEAKERS

$269.00 $328.98

YU3

Powered Bookshelf Speakers

Bridging the gap between desktop and bookshelf speaker, YU3 makes no compromises with 30W per side of built-in Class D amplifier power giving crystal clear sound. 4” Kevlar® drivers and 1” silk tweeters provide distortion-free sound fed by YU3’s impressive input section. Featuring the same inputs as the larger YU5, two optical TOSLINK inputs, integrated Bluetooth™ 4.0 for wireless streaming, an RCA port and a 3.5mm AUX jack input, YU3 is ready for anything. Easily add a subwoofer to your system with the sub-out port, and ensure your mobile devices are always ready to go with the USB charging port.

Be Surprised. It is hard to believe all the power and connectivity we packed into the YU3.

SILK DOME TWEETERS

YU3 features 1” silk dome tweeters to deliver clear crisp highs. Scintillating sound.

KEVLAR® DRIVERS

The 4” Kevlar® drivers provide well-balanced mid-range and bass tones for overall sound quality that faithfully reproduces your favorite music.

CONTROL KNOB

YU3 has a 1.5” rear bass port that has been carefully designed and tuned to eliminate port turbulence while extending bass response.

INPUTS AND OUTPUTS

YU3 features five input choices, including two optical inputs and Bluetooth™ 4.0. If you are looking for more low-end, connect a powered subwoofer to the SUB OUT port.

REAR BASS PORT

YU3 has a 1.5” rear bass port that has been carefully designed and tuned to eliminate port turbulence while extending bass response.

KNURLED BINDING POSTS

The speaker connection from Active (LEFT) to Passive (RIGHT) uses high quality knurled binding posts. This standardized wiring system allows you to trim the included premium speaker wire to the desired length or purchase longer lengths for more versatility.

REMOTE CONTROL

The Kanto remote control gives you input, volume, and tone control, and allows you to control your connected Bluetooth™ device. You can also trigger USB charging when the speaker is in standby mode.

WHAT’S IN THE BOX?

YU3 comes complete with a remote control (with batteries), power cord, speaker wire and an RCA – mini-jack adapter that you can use to adapt for either input. The package also includes a manual and rubber feet.

SPECIFICATIONS

GENERAL

Tweeters: 1 inch Silk Dome
Woofers: 4 inch Kevlar®
Remote: Included

AUDIO

Amplifier Type: Class D
Nominal Impedance: 4 Ohm
Sensitivity 2.83V (/1W/1m): 85 dB
Total Harmonic Distortion: < 0.3%
Frequency Response: 60 Hz – 20 kHz
Crossover System: 2-way
Crossover Frequency: 2.0 kHz

INPUTS AND OUTPUTS

Inputs: 1 x 3.5mm mini-jack AUX | 1 x RCA L/R | 2 x Optical (TOSLINK) | 1 x Bluetooth™
Outputs: 1 x Subwoofer | 1 x USB Charge 5V 1A
Speaker Terminals: Left and Right Binding Posts
Input Sensitivity: 550 mV

POWER

Power Output: 30 Watts RMS per channel
Input Voltage / Frequency: AC 100V – 240V 50/60 Hz (auto switching)
Standby Power Consumption: < 0.5 W

WEIGHTS AND MEASUREMENTS

Dimensions (each speaker): 5.5” W x 7.5” D x 8.7” H (14 x 19.1 x 22.1 cm)
Net Weight (active):
 6.8 lbs (3.1 kg)
Net Weight (passive): 5.3 lbs (2.4 kg)
Gross Weight: 16.1 lbs (7.3 kg) (boxed pair)
Shipping Box Dimensions: 16.3″ x 11.9″ x 11″ (41.3 x 30.3 x 28 cm)

WHAT’S IN THE BOX?

Remote with batteries
Power cord
Speaker Wire
RCA – Mini Jack Adapter
Rubber feet
Manual

Related Products